Aprilia RXV 450i Tuareg Rally Replica (2011)

Posted on by

The Aprilia RXV 450i Tuareg Rally Replica is a 2011 motorcycle with a four-stroke, 77-degree V-twin cylinder engine that has a 449 cc capacity and a compression ratio of 12.5:1. It is liquid-cooled with a dry sump and an external oil tank. The bike has a dual stainless steel exhaust system and an integrated engine management system that controls ignition and fuel injection via a throttle body of approximately 38 mm. It has electronic ignition and electric starting, with a cable-operated multi-plate wet clutch and a five-speed transmission. The final drive is done by chain. This bike has a chrome-molybdenum steel perimeter frame with aluminium alloy vertical members and a lightweight rear frame. Its front suspension is a 50 mm Marzocchi upside-down fork with double adjustment and its rear suspension a box-section aluminium swingarm with a cast body, hydraulic monoshock with compression and rebound adjustment. It has a single 310 mm floating disc with four-piston Nissin floating caliper for its front brakes and single 240 mm disc with a two-piston Nissin floating caliper for the rear brakes. The bike has a 90/90 -21 front tyre and a 140/80 -18 rear tyre, with dimensions of 2222 mm / 87.5 in length and 800 mm / 31.5 in width.

Technical specifications:

Make Model: Aprilia RXV 450i Tuareg Rally Replica

Year: 2011


Engine: Four stroke, 77 degrees V-twin cylinder,
Capacity: 449 cc / 27.4 cu in
Bore x Stroke: 76 X 49.5 mm
Compression Ratio: 12.5:1
Cooling System: Liquid cooled
Lubrication: Dry sump with external oil tank. Separate gearbox lubrication
Exhaust System: Dual stainless steel, Arrow, Euro 3
Induction: Integrated engine management system controlling ignition and fuel injection. Throttle body: ~A38 mm
Ignition: Electronic
Starting: Electric
Clutch: Cable operated multi-plate wet clutch
Transmission: 5 Speed
Final Drive: Chain
Frame: Chrome-molybdenum steel perimeter frame with aluminium alloy vertical members. Lightweight rear frame.
Front Suspension: ~A50 mm Marzocchi upside down fork, double adjustment

Rear Suspension: Box section aluminium swingarm with cast body, hydraulic monoshock with compression and rebound adjustment
Front Brakes: Single ~A310 mm floating disc, 4 piston Nissin floating caliper
Rear Brakes: Single ~A240 mm disc, 2 piston Nissin floating caliper
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Dimensions: Length: 2222 mm / 87.5 in Width: 800 mm / 31.5 in

Related models: