Aprilia Pegaso 650 Outback (2000-01)

The Aprilia Pegaso 650 Outback is a motorcycle that was manufactured between 2000 and 2001. It has a single-cylinder, four-stroke engine with a capacity of 652cc and a compression ratio of 9.1:1. The cooling system is liquid-cooled and the bike has a 5-speed transmission and chain drive. The front suspension is adjustable upside-down forks, while the rear suspension is a varying section high strength steel swing-arm with the Aprilia Progressive System (APS) rising rate linkage. The front and rear brakes are single-disc with 2-piston caliper and 1-piston caliper, respectively. The dimensions of the bike are 2159 mm length, 810 mm width and a wheelbase of 1478 mm, while the seat height is at 810 mm. The Aprilia Pegaso 650 Outback has a maximum power of 36.4 kW / 50 hp at 7000 rpm, and its maximum torque is 59 Nm / 6.02 kgf-m / 43.5 lb-ft at 6500 rpm. Its front and rear tyres are 100/90-19 and 130/80-17 respectively.


Technical specifications:

Make Model: Aprilia Pegaso 650 Outback

Year: 2000 – 01


Engine: Four stroke, single-cylinder, DOHC, 5 valves
Capacity: 652 cc / 39.8 cu in
Bore x Stroke: 100 x 83 mm
Compression Ratio: 9.1:1
Cooling System: Liquid cooled
Induction: 2 x ~A32 mm Mikuni BST33
Starting: Electric
Max Power: 36.4 kW / 50 hp @ 7000 rpm
Max Torque: 59 Nm / 6.02 kgf-m / 43.5 lb-ft @ 6500 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: ~A45 mm Upside down forks preload adjustable, Marzocci
Front Wheel Travel: 175 mm / 6.9 in
Rear Suspension: Varying section high strength steel swing-arm, Aprilia Progressive System (APS) rising rate linkage
Front Brakes: Single ~A300 mm disc, 2 piston caliper

Rear Brakes: Single ~A220 mm disc, 1 piston caliper
Front Tyre: 100/90-19
Rear Tyre: 130/80-17
Dimensions: Length: 2159 mm / 85.0 in Width: 810 mm / 31.9 in
Wheelbase: 1478 mm / 58.2 in
Seat Height: 810 mm / 31.9 in

Related models: