Derbi Senda 125R 4T (2008)

The Derbi Senda R 125 4T motorcycle was produced in 2008 and has a four-stroke, single-cylinder OHC engine with a capacity of 124cc. It has a bore x stroke of 56 x 49mm and a compression ratio of 11.0:1. The bike uses an air-cooled cooling system and a 22mm Keihin induction system with electronic ignition and electric starting. The maximum power of the bike is 9kW/12hp at 6500rpm and the maximum torque is 9Nm/6.6lb-ft also at 6500rpm. The Senda R 125 4T uses a multiplate clutch and a 5-speed transmission with a final drive via a chain. The front suspension consists of 41mm Paoli forks with 195mm/7.6in of wheel travel and the rear suspension is a Paoli monoshock with 170mm/6.7in of wheel travel. The front and rear brakes are single discs, with the front being 260mm and the rear being 220mm. The Senda R 125 4T has a wheelbase of 1450mm/57.1in, a dry weight of 118kg/269lbs, and a fuel capacity of 7.5 litres/2.0 US gal. The standing 1/4 mile time for the bike is 12.4 seconds and the top speed is approximately 97.3km/h.


Technical specifications:

Make Model: Derbi Senda R 125 4T

Year: 2008 –


Engine: Four stroke, single cylinder. OHC
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 56 x 49 mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 22mm Keihin
Ignition: Electronic
Starting: Electric
Max Power: 9 kW / 12 hp @ 6500 rpm
Max Torque: 9 Nm / 6.6 lb-ft @ 6500 rpm
Clutch: Multiplate
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 41mm Paoli forks
Front Wheel Travel: 195 mm / 7.6 in

Rear Suspension: Paoli monoshock
Rear Wheel Travel: 170 mm / 6.7 in
Front Brakes: Single 260mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 80/90 -21
Rear Tyre: 180/80 -18
Wheelbase: 1450 mm / 57.1 in
Dry Weight: 118 kg / 269 lbs
Fuel Capacity: 7.5 Litres / 2.0 US gal
Standing 1/4 Mile: 12.4 sec
Top Speed: 97.3 km/h

Related models: