Harley Davidson Dyna Street Bob (2013)

Posted on by

The Harley Davidson Dyna Street Bob motorcycle is a 2013 model with a four-stroke, 45 degrees V-twin Twin Cam 96 vibration-isolated engine that has hydraulic self-adjusting lifters and two valves per cylinder. It has a capacity of 1584cc/96 cu-in and a compression ratio of 9.2:1. The motorcycle has electronic sequential port fuel injection (ESPFI) and a single-fire, non-wasted, map-controlled spark ignition. The engine can produce a maximum torque of 124.7 Nm/92 ft/lbs at 3000 rpm and has a six-speed transmission with a belt final drive and a chain primary drive with a 34/46 ratio. The frame is made of mild steel, has a tubular design, and the front suspension is a 49 mm with polished aluminum fork triple clamp and dual-rate springs, while the rear suspension is a coil-over shock. The motorcycle has single 300mm disk front and single 292mm disk rear brakes. The front tire is 100/90-19 57H with a rear tire of 160/70-17 73V. It has a wheelbase of 1630 mm/64.2 in and a seat height of Laden 648 mm/25.5 in and Unladen 678 mm/26.7 in. With a gross vehicle weight rating of 492.2 kg/1085 lbs, and weighing in wet at 302.6 kg/667 lbs, the motorcycle has a fuel capacity of 17.8 liters/4.7 gallons and an oil capacity of 2.8 liters.

Technical specifications:

Make Model: Harley Davidson Dyna Street Bob

Year: 2013


Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.3 x 111.1 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 124.7 Nm / 92 ft/ lbs. @ 3000 rpm
Transmission: 6 Speed
Final Drive: Belt
Primary Drive: Chain, 34/46 ratio
Gear Ratio: 1st 9.311 2nd 6.454 3rd 4.793 4th 3.882 5th 3.307 6th 2.79
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs,

Rear Suspension: Coil over shock ,
Front Brakes: Single 300mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 2 piston caliper
Front Tyre: 100/90-19 57H
Rear Tyre: 160/70-17 73V
Rake: 29 degrees
Trail: 120 mm / 4.7 in
Dimensions: Length 2357 mm / 92.8 in Width 953 mm / 37.5 in. Height 1280 mm / 50.4 in
Wheelbase: 1630 mm / 64.2 in
Seat Height: Laden 648 mm / 25.5 in. Unladen 678 mm / 26.7 in.
Gross Vehicle Weight Rating: 492.2 kg / 1085 lbs
Wet Weight: 302.6 kg / 667 lbs.
Oil Capacity: 2.8 Litres
Fuel Capacity: 17.8 Litres / 4.7 gal

Related models: