Harley Davidson FLH 1200 Electra Glide (1975)

The Harley Davidson FLH 1200 Electra Glide was a motorcycle produced in 1975. It had a four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder engine with a capacity of 1207 cc / 74 cu-in. The cooling system was air cooled and the compression ratio was 8.0:1. It had a Tillotson 1-5/8″ dual Venturi diaphragm w/accelerator pump induction system and an alternator/battery ignition. The electric starting system produced a maximum power of 58 hp / 42.3 lb-ft @ 5150 rpm and max torque of 70 lb-ft / 95 Nm @ 4000 rpm. The transmission was a 4 speed system and the final drive was a chain. The motorcycle had a telescopic fork front suspension with a swinging fork rear suspension. The front and rear brakes were both single 254mm discs. The front and rear tyres both measured 5.10-16. The wet weight of the motorcycle was 340 kg / 749.6 lbs and the fuel capacity was 19 litres / 5.0 US gal.


Technical specifications:

Make Model: Harley Davidson FLH 1200 Electra Glide

Year: 1975


Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1207 cc / 74 cu-in
Bore x Stroke: 87.3 x 100.8 mm
Cooling System: Air cooled
Compression Ratio: 8.0:1
Induction: Tillotson 1-5/8″ dual Venturi diaphragm w/accelerator pump
Ignition: Alternator/battery
Starting: Electric
Max Power: 58 hp / 42.3 lb-ft @ 5150 rpm
Max Torque: 70 lb-ft / 95 Nm @ 4000 rpm
Transmission: 4 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Swinging fork.
Front Brakes: Single 254mm disc

Rear Brakes: Single 254mm disc
Front Tyre: 5.10-16
Rear Tyre: 5.10-16
Wet Weight: 340 kg / 749.6 lbs
Fuel Capacity: 19 Litres / 5.0 US gal

Related models: