Harley Davidson FLHT Electra Glide Standard (1995)

Posted on by

The Harley Davidson FLHT Electra Glide Standard motorcycle was manufactured in 1995. Powered by a four-stroke, 45 degree V-Twin, OHV engine with a capacity of 1337 cc, it had a compression ratio of 8.5:1 and fuel injection induction. The maximum power it could produce was 67 hp/48.8 kW at a rate of 5200 rpm, and the maximum torque was 107 Nm/79 lb-ft at 3300 rpm. Its clutch was a multi-plate dry-clutch and it had a transmission of 5 speeds. The bike used a belt as the final drive. It had telescopic forks for front suspension and a rear suspension. The front brakes were 2x discs and the rear brakes were a single disc. Both the front and back tires of the Harley Davidson FLHT Electra Glide Standard motorcycle were tubeless T80-16 T and T90-16T, respectively. The dry weight of the bike was 344 kg/758 lbs, and it had a fuel capacity of 18.9 liters/4.5 US gal.

Technical specifications:

Make Model: Harley Davidson FLHT Electra Glide Standard

Year: 1995


Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1337 cc / 81.5 cu-in
Bore x Stroke: 88.8 x 108.0 mm
Cooling System: Air cooled
Compression Ratio: 8.5:1
Induction: Fuel injection
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Power: 67 hp / 48.8 kW @ 5200 rpm
Max Torque: 107 Nm / 79 lb-ft @ 3300 rpm
Clutch: Multi-plate dry-clutch
Transmission: 5 Speed
Final Drive: Belt
Front Suspension: Telescopic forks
Rear Suspension:

Front Brakes: 2x discs
Rear Brakes: Single disc
Front Tyre: T 80-16 T
Rear Tyre: T 90-16T
Dry Weight: 344 kg / 758 lbs
Fuel Capacity: 18.9 Litres / 4.5 US gal

Related models: