Honda CB125R 2018 (2018)

Posted on by

The Honda CB125R 2018 motorcycle has a four stroke, single cylinder, SOHC, two valve engine with a capacity of 124.7 cc. It has a liquid cooling system and a compression ratio of 11.0:1. The bike is equipped with PGM-FI electronic fuel injection and a digital CDI ignition. The maximum power output is 13.1 hp at 10000 rpm, and the maximum torque is 10.2 Nm at 8000 rpm. The clutch is wet, multi-plate with coil springs, and the transmission has six speeds. The bike has a final drive of an o-ring sealed chain and an inner pivot diamond frame. The front suspension is a 41mm upside-down telescopic inverted fork, and the rear suspension is a single damper. The front and rear brakes are a single 296mm disc and a single 220mm disc respectively, with an ABS system type of front and rear independent ABS with IMU. The bike has six-spoke cast aluminum wheels with a front wheel size of 17M/C x MT3.00 and a rear wheel size of 17M/C x MT4.00. The front tire size is 110/70R17M/C 54H, and the rear tire size is 150/60R17M/C 66H. The rake angle is 24.2 degrees, and the trail is 90 mm. The length of the bike is 2015 mm, the width is 820 mm, and the height is 1055 mm. The wheelbase is 1345 mm, and the seat height is 816 mm. The ground clearance is 140 mm, and the bike weighs 126 kg with a fuel capacity of 10 liters.

Technical specifications:

Make Model: Honda CB 125R

Year: 2018


Engine: Four stroke, single cylinder, SOHC, two valve
Capacity: 124.7 cc / 7.6 cu-in
Bore x Stroke: 58 x 47.2 mm
Cooling System: Liquid cooled
Compression Ratio: 11.0:1
Lubrication: Wet sump
Induction: PGM-FI electronic fuel injection
Ignition: Digital CDI
Battery: YTZ6V 12V 5Ah MF
Starting: Electric
Max Power: 13.1 hp / 9.8 kW @ 10000 rpm
Max Torque: 10.2 Nm / 7.3 lb-ft @ 8000 rpm
Clutch: Wet, multiplate with coil springs
Transmission: 6 Speed
Final Drive: O-ring sealed chain

Frame: Inner Pivot Diamond Frame
Front Suspension: 41mm upside-down telescopic inverted fork
Rear Suspension: Single-damper
Front Brakes: Single 296mm disc, four piston Nissin caliper
Rear Brakes: Single 220mm disc, one piston caliper
ABS: Front and rear inertial measurement unit (IMU)
Wheels: Six spoke cast aluminium
ABS System Type: Front & rear independent ABS with IMU
Front Wheel: 17M/C x MT3.00
Rear Wheel: 17M/C x MT4.00
Front Tyre: 110/70R17M/C 54H
Rear Tyre: 150/60R17M/C 66H
Rake: 24.2 o
Trail: 90 mm / 3.5 in
Dimensions: Length 2015 mm / 79.3 in Width 820 mm / 32.2 in Height 1055 mm / 41.5 in
Wheelbase: 1345 mm / 52.9 in
Seat Height: 816 mm / 32.1 in
Ground Clearance: 140 mm / 5.5 in
Wet Weight: 126 kg / 277.7 lbs
Fuel Capacity: 10 Litres / 2.6 US gal

Related models: