Victory Hammer (2010)

Posted on by

The Victory Hammer 8-Ball motorcycle was manufactured in 2010 with a 1634 cc, air/oil cooled, 50 degree V-twin SOHC engine. The electronic fuel injection system used dual 45 mm throttle bodies, and the compression ratio was 8.7:1. The clutch was wet and multi-plate, and the bike had a 5-speed transmission with a carbon fiber reinforced belt drive. The front suspension was an inverted cartridge telescopic fork, 43mm in diameter, with 5.1 inches of wheel travel. The rear suspension was single, a mono-tube gas cast aluminum with rising rate linkage, with 3.0 inches/76mm of travel and preload adjustable spring. The front brakes were a single 300mm floating rotor 4 piston caliper, and the back brakes were a single 300mm floating rotor 2 piston caliper. The front tire was a 130/70R18, and the rear tire was a 250/40R18. The seat height was 660 mm/26 inches, and the dry weight was 305 kg/672 lbs. The fuel capacity was 17 liters/4.5 gallons.

Technical specifications:

Make Model: Victory Hammer 8-Ball

Year: 2010


Engine: Air / oil, , four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634
Bore x Stroke: 101 x 102 mm
Compression Ratio: 8.7:1
Induction: Electronic Fuel Injection with dual 45 mm throttle bodies
Ignition / Starting: – / electric
Clutch: Wet, multi-plate
Max Power:
Max Torque:
Transmission / Drive: 5 Speed / Carbon Fiber Reinforced Belt
Front Suspension: Inverted cartridge telescopic fork, 43 mm diameter, 5.1 in 130 mm wheel travel
Rear Suspension: Single, mono-tube gas, cast aluminum with rising rate linkage, 3.0 in/76 mm travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70R18

Rear Tyre: 250/40R18
Seat Height: 660 mm / 26 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 gal

Related models: