Victory Kingpin (2010-12)

The Victory Kingpin motorcycle was produced from 2010 to 2012 and has a four-stroke, 50 degrees V twin SOHC engine with 4 valves per cylinder and a capacity of 1634 cc. It has an air/oil cooling system, electronic fuel injection with 44mm throttle bodies, and a wet, multi-plate clutch. The transmission is six-speed with a carbon fiber reinforced belt final drive. The front suspension is a 43mm inverted cartridge telescopic fork with 130 mm/5.1 in wheel travel, while the rear suspension features single, mono-tube gas forged and cast aluminum with rising-rate linkage and 100 mm/3.9 in wheel travel. The brakes consist of a single 300mm floating rotor with four-piston caliper for the front and a single 300mm floating rotor with two-piston caliper for the rear. The front tire size is 130/70 -21, while the back is 180/55 B18. The seat height is 673 mm/26.5 in, the gross vehicle weight rating is 549 kg/1210 lbs, and the dry weight is 297 kg/654 lbs. The fuel capacity is 17 liters/4.5 US gal.


Technical specifications:

Make Model: Victory Kingpin

Year: 2010 – 12


Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in

Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70 -21
Rear Tyre: 180/55 B18
Seat Height: 673 mm / 26.5 in
GVWR: 549 kg / 1210 lbs
Dry Weight: 297 kg / 654 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

Related models: