Harley Davidson FXD Dyna Super Glide (1991-94)

Posted on by

The Harley Davidson FXD Dyna Super Glide was a motorcycle produced from 1991-94. It featured a four stroke, 45 degree V-Twin engine with a capacity of 1337 cc, and a compression ratio of 8.5:1. Induction was handled by a 38mm Keihin carburetor, and ignition was controlled by an analogue CDI system. The Super Glide had a maximum power output of 67 hp at 6000 rpm and a maximum torque of 97 Nm at 2350 rpm. The transmission was a five-speed setup with a belt final drive. The frame was made from mild steel with a tubular design featuring rectangular section backbone, forged fender supports and stamped, cast and forged junctions, all MIG welded together. Suspension was handled by a 39mm polished aluminum fork and dual-rate springs in the front and a coil over shock in the rear. Braking was provided by single 292mm discs both front and back. The Super Glide weighed in at 271.0 kg (597.5 lbs.) and had a fuel capacity of 16 litres (4.2 US gal).

Technical specifications:

Make Model: Harley Davidson FXD Dyna Super Glide

Year: 1991 – 94


Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1337 cc / 81.5 cu-in
Bore x Stroke: 88.8 x 108 mm
Cooling System: Air cooled
Compression Ratio: 8.5:1
Lubrication: Dry sump
Induction: 38mm Keihin carburetor
Ignition: Analogue CDI
Starting: Electric
Max Power: 67 hp / 48.9 kW @ 6000 rpm
Max Torque: 97 Nm / 71.5 lb-ft @ 2350 rpm
Clutch: Wet 9-plate
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 10.110 2nd 6.958 3rd 4.953 4th 3.862 5th 3.150

Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 39 mm w/ polished aluminum fork triple clamp and dual-rate springs
Rear Suspension: Coil over shock
Front Brakes: Single 292mm disc
Rear Brakes: Single 292mm disc
Front Tyre: 130/90-16
Rear Tyre: 130/90-16
Dry Weight: 271.0 kg / 597.5 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

Related models: