Husaberg FE 250 Enduro (2013-15)
The Husaberg FE 250 Enduro motorcycle was produced from 2013 to 2015 and features a four-stroke, single-cylinder, SOHC engine with a capacity of 249.7 cc/15.2 cu-in. The engine is liquid-cooled and has a compression ratio of 12.2:1, lubricated by pressure lubrication with two oil pumps using Motorex SAE 10W-50 engine oil. The bike has an aluminium silencer, Keihin EFI throttle body 42 mm induction, and Keihin EMS ignition. The electric starter has a 12V 4Ah/12V 7Ah battery. The clutch is a wet multi-disc type with Brembo hydraulics, and the transmission includes six speeds, final drive Chain X-Ring 5/8 x 1/4″, and a primary ratio of 24:73. The handlebar is Neken aluminium 28/22 mm, and the frame is a double cradle perimeter design 25CrMo4 with a subframe consisting of cross-linked polyethylene. The front suspension includes WP 4860MA HUSABERG SUPERMOTO with 300 mm wheel travel, while the rear shock absorber is WP-PD S and has 335mm wheel travel. The front and rear brakes have a single 260mm 2 piston caliper and a single 220mm disc 1 piston caliper, respectively. The front and rear wheels are 1.60 x 21″ DID and 2.15 x 18″ DID, respectively. The seat height is 970 mm/38.1 in, and the dry weight is 107.5 kg/237 lbs. The bike has a fuel capacity of 9.5 litres/2.5 US gal, a wheelbase of 1482 mm/58.3 in, a ground clearance of 345 mm/13.5 in, and a steering head angle of 63.5 degrees.
Technical specifications:
Make Model: Husaberg FE 250 Enduro
Year: 2013 – 15
Engine: Four stroke, single-cylinder, SOHC
Capacity: 249.7 cc / 15.2 cu-in
Bore x Stroke: 78 x 52.3 mm
Cooling System: Liquid cooled
Compression Ratio: 12.2:1
Lubrication: Pressure lubrication with 2 oil pumps
Engine Oil: Motorex, SAE 10W-50
Silencer: Aluminium
Induction: Keihin EFI, throttle body 42 mm
Ignition: Keihin EMS
Battery: 12V 4Ah/Electric starter/12V 7Ah
Starting: Electric
Clutch: Wet multi-disc clutch, Brembo hydraulics
Transmission: 6 Speed
Final Drive: Chain X-Ring 5/8 x 1/4″
Primary Ratio: 24:73
Secondary Drive: 14:52 (13:52)
Handlebar: Neken, Aluminium 28/22 mm
Frame: Double cradle perimeter design 25CrMo4, subframe Cross-linked Polyethylene
Front Suspension: WP 4860MA HUSABERG SUPERMOTO, 300mm wheel travel.
Front Wheel Travel: 300 mm / 11.8 in
Rear Suspension: WP-PD S shock absorber, 335mm wheel travel.
Rear Wheel Travel: 335 mm / 13.1 in
Front Brakes: Single 260mm 2 piston caliper
Rear Brakes: Single 220mm disc 1 piston caliper
Front Wheel: 1.60 x 21” DID
Rear Wheel: 2.15 x 18” DID
Front Tyre: 90/90-21
Rear Tyre: 140/80-18
Steering Head Angle: 63.5 degrees
Wheelbase: 1482 mm / 58.3 in
Ground Clearance: 345 mm / 13.5 in
Seat Height: 970 mm mm / 38.1 in
Dry Weight: 107.5 kg / 237 lbs
Fuel Capacity: 9.5 Litres / 2.5 US gal
Related models:
- Husaberg TE 300 (2011-12)
- Husaberg TE 125 (2012-13)
- Husaberg FE 450 Enduro (2013-14)
- Husaberg FE 600 (1995)
- Husaberg FE 550e Enduro (2007)
- Husaberg FS 550 (2010-11)
- Husaberg TE 300 (2013-14)
- Husaberg TE 125 (2014-15)
- Husaberg FE 570 Enduro (2012)
- Husaberg FE 450e (2008-10)
- Husaberg FE 650e Supermono (2004-05)
- Husaberg FE 400E (1997)
- Husaberg FE 450E Limited Edition (2007)
- Husaberg TE250 (2013-14)
- Husaberg FS 650e Supermoto (2008)
- Husaberg FE 650e (2004-06)
- Husaberg FE 650e (2001-03)
- Husaberg FE 650e Supermono (2001-03)